EN - 7
CAT2 2Safety
2.4 Classification of the warnings
The warnings used in the operating instructions are divided into four different
levels and are shown prior to potentially dangerous work steps. Arranged in
descending order of importance, they have the following meaning:
2.5 Warning and information signs
Following warning and information signs are located on the product:
These markings must always be legible. They may not be covered, obscured,
painted over or removed.
2.6 Emergency information
In case of emergency, immediately interrupt the following supplies:
• Electricity, compressed air, gas
Further measures can be found in the "Power source" operating instructions or
in the documentation of further peripheral devices.
Describes an imminent threatening danger. If not avoided, this will result in
fatal or extremely critical injuries.
Describes a potentially dangerous situation. If not avoided, this may result in
serious injury.
Describes a potentially harmful situation. If not avoided, this may result in
slight or minor injuries.
Describes the risk of impairing work results or potential material damage to
the equipment.
Symbol Meaning
Read and observe operating instructions!
To Next Page
Loading...