ABL WALLBOX eMH1 User Manual

Appendix – Technical specifications |
25
Appendix
Technical specifications
Model code 1W22Y1 / PZ42D-T0A02 1W22X1 / PZ42D-L0A02
Rated voltage 230 / 400V
Grid frequency 50Hz
Current 32A
Maximum output 22kW
Charging connection Type 2 charging cable (ca. 6 m)
Phase system 3-phase
Residual Current Devices RCCB, Type A, 30 mA
DC fault current detection DC-RCM, I
Δn d.c.
≥ 6 mA
EVCC 2
Compliance IEC 61851-1
Control / customization Internal RS485 interface
Terminal block up to 50mm²
Operating temperature -30°C to 50°C
Storage temperature -30°C to 85°C
Relative humidity 5 to 95% (no condensation)
Class of protection I
Degree of protection (housing) IP54
Overvoltage category III
Dimensions (HxWxD) 272×221×116mm
Weight per unit Approx. 4.5kg
Dimensions
221 mm
116 mm
272 mm

ABL WALLBOX eMH1 Specifications

General

Model	eMH1
Manufacturer	ABL
Connector Type	Type 2
Installation	Wall-mounted
Protection Class	IP54
Input Voltage	400 V
Voltage	230/400 V
Category	Wallbox
Charging Power	11 kW
Charging Current	16 A
Operating Temperature	-25°C to +50°C
Communication	Modbus