| Installation – Installation site requirements
8
Installation
It is recommended to have the entire installation of the wallbox carried out by a qualified specialist electrical con-
tractor.
Electrical installation, final testing and certification for operation must be carried out by a qualified
specialist electrical contractor, who, on the basis of their specialist training and experience, as well as
their knowledge of the relevant standards, is able to assess and carry out the working steps described in
this manual and recognise potential hazards.
Installation site requirements
The installation site must be freely accessible.
The mounting surface must be level and solid.
The mounting surface must measure at least 272
x 222 mm (height x width).
272 mm
The installation height should be between 140
and 160 cm (ground to bottom edge of housing).
Minimum distances to other technical installa-
tions must be observed.
Ideally, the installation site should provide a ready
connection to the electricity grid. Otherwise, a
separate power supply cable must be installed.
140
to
160 cm
To Next Page
Loading...
Need help?
General
