ABL WALLBOX eMH1 User Manual

Contents |
III
Contents
Service II
Downloads II
Safety and user information 4
General 4
Safety information 4
User information 5
Introduction to the Wallbox eMH1 6
Identifying your wallbox 6
Components included with the wallbox 6
Accessories 7
Installation 8
Installation site requirements 8
Tools and accessories required 9
Preparing the mounting site 9
Preparing and fixing the wallbox in place 11
Electrical connection of the wallbox 12
Commissioning the wallbox 13
Load management with homeCLU 15
Installation on mounting pole or mounting plate 15
Charging procedure 16
Charging an electric vehicle 16
Error resolution and maintenance 18
Identifying errors 18
General operational malfunctions 22
Checking the internal RCCB 22
Taking the Wallbox eMH1 out of operation 23
Appendix 25
Technical specifications 25
Dimensions 25
Standards and guidelines 26
Trademarks 26
Definitions 26
Copyright and disclaimer 26
CE certification and compliance declaration 27
Disposal advice 27

ABL WALLBOX eMH1 Specifications

General

Model	eMH1
Manufacturer	ABL
Connector Type	Type 2
Installation	Wall-mounted
Protection Class	IP54
Input Voltage	400 V
Voltage	230/400 V
Category	Wallbox
Charging Power	11 kW
Charging Current	16 A
Operating Temperature	-25°C to +50°C
Communication	Modbus