Contents |
III
Contents
Contact II
Additional technical information 5
Intended use 5
Information in this document 5
Safety and user information 6
General 6
Safety information 6
User information 7
Introduction to the Wallbox eMH2 9
Identifying your wallbox 9
Components included with the wallbox 9
Accessories 10
Installation 13
Installation site requirements 13
Tools and accessories required 14
Preparing the installation site 15
Preparing and fixing the wallbox in place 16
Electrical connection of the wallbox 17
Data cable connections 19
Commissioning the wallbox 21
Connecting the E3BWLAN 22
Installing and connecting the E3BLTE1 24
Axing the label in accordance with
DIN EN 17186-2019 26
Configuring the Wallbox eMH2 28
Stand-alone operation of a Controller wallbox 28
Stand-alone operation of an Extender wallbox 28
Operation and address allocation in a
group installation 28
Allocating bus addresses in group installations 29
Configuration via software 29
Data cable connection with the computer 30
Set-up via the Charge Point Administration
application 31
Setting up data communication 34
Setting up an OCPP backend 38
Completing the set-up 39
Manual RFID card administration 39
Charging procedure 41
Error resolution and maintenance 44
Identifying errors 44
General operational malfunctions 48
Testing the RCCB 49
Taking the Wallbox eMH2 out of operation 50
Maintenance 51
Appendix 52
Technical specifications 52
Standards and guidelines 54
Trademarks 54
To Next Page
Loading...
Need help?
General
