ABL Wallbox eMH3 - CE Certification and Compliance Declaration; Glossary & Definitions

appendIx
29
Standard Description
DIN EN 61851-1: 2012-01 Conductive charging systems for electric vehicles
– Part 1: General requirements
E DIN EN 61851-22:2011-04
Conductive charging systems for electric vehicles –
Part 22: AC charging station for electric vehicles
HD 60364-7-722:2012 Low voltage installations – Part 7-722: Power sup-
ply for electric vehicles
Classes of protection & Degrees of protection
Class of protection /
Degree of protection
Description
The device complies with IEC protection class 1.
IP 54
Degree of protection of the device: Protection against touch,
dust in harmful quantities and protection from splashing water
CE certification and compliance declaration
The ABL Wallbox carries the CE mark. The associated compliance dec-
laration is included with the ABL Wallbox as a separate printed docu-
ment and is also available in electronic form at
www.abl.de
for download.
Glossary & Definitions
In the following, important abbreviations and terms used in this manual are explained.
Abbreviation Description Meaning
DC Direct Current Direct current
DC-RCM
Direct Current - Residual
Current Monitor
Monitoring device for detecting DC fault
currents
LED Light Emitting Diode Light-emitting diode
MCB Miniature Circuit Breaker Residual current circuit breaker
RCCB
Residual current operated
circuit breaker
Residual current device (RCD)