108
the door station monitor rings immediately, but
the ABUS Link Station is called with a delay of
10 seconds.
Microphone volume (0~100%): Set the monitor’s microphone volume here.
The higher the percent, the louder (and more
sensitive) the monito
’s microphone will be.
Door bell volume (monitor) (0~100%): Set the monito
’s door bell volume here.
Conversation volume (10~100%): Set the desired conversation volume on the
monitor here.
Key tone: Enables the key tone when typing on the
monito
’s touchscreen.
Auto anser If the function is activated, the door intercom
system accepts the call with the answering
machine after the bell call has expired (ring
duration).
Auto Answer Immediately When the function is enabled, the door
intercom immediately accepts a call with the
answering machine.
If the function is disabled, the answering
machine will accept the call automatically after
the set call duration.
Do not disturb mode: Indoor station:
Allows calls from door stations and extension
monitors. Calls from other apartments will not
be allowed. To allow calls from apartments,
please set the “do not disturb” function to
“disabled”.
All:
All calls will be rejected. (Calls from door
station, extension monitor or other apartment)
Do not disturb: Disabled, all day, time schedule (daily from/to
hour/minute). Determines the time of day
during which the “Do not disturb” function is
active.
Firmware release note
Function: Auto Answer, Instant Auto Answer
Video module (THVS20000(S) / TVHS20010(S)): V2.2.3_build_201029
Monitor (TVHS20200 / 210 / 220): V2.1.2_build_201029
If you want to reuse an (already existing) door bell, turn to chapter “
To Next Page
Loading...
