238
Display Shows Possible Cause(s) Possible Solution(s)
Invalid Date j The date entered is invalid
(dates for reminders cannot
be set to occur in the past).
j Re-enter date.
Invalid Hyper
Values
j The hyper warning limit value
must be greater than all of
your target ranges in the time
block settings.
j Reset the hyper warning limit or revise the target
ranges in time blocks and re-enter the hyper
warning limit.
j Enter a hyper warning limit that is above the target
ranges of your time blocks. See Chapter 5,
“Changing Meter Settings.”
Invalid Hypo Values j The hypo warning limit value
must be less than all of your
target ranges in the time
block settings.
j Reset the hypo warning limit or revise the target
ranges in time blocks and re-enter the hypo
warning limit.
j Enter a hypo warning limit that is below the target
ranges of your time blocks. See Chapter 5,
“Changing Meter Settings.”
To Next Page
Loading...
