You need the meter, a test strip, a lancing device
with a drum loaded, and the AST
cap from the kit.
1. To make sure the display is working properly, turn
o the meter, then press and hold
to see the
complete display. All segments should be clear
and look exactly like the picture. If any segments
are missing from the display, there may be a
problem with the meter. Contact the ACCU‑CHEK
Customer Care Service Center at
1‑800‑858‑8072.
2. Wash your hands and the test site with warm,
soapy water and dry thoroughly.
41
To Next Page
Loading...
