106
Using the meter as an electronic notebook
i
If the time and date were not set at the time of testing, then the
memory location number is displayed instead of the time and
date.
Memory location number
If the memory contains both results that were saved together
with the time and date and results that were not saved with this
information, then you will see results shown together with their
time and date as well as results shown only with their memory
location number.
i
If you turn the meter off with the Test button, it shows you the
number of test strips remaining in the drum (see Chapter 2.3.2).
i
The meter turns off automatically if you have not pressed a but-
ton for 60 seconds.
AC_CP_LCM_Manual_EN-UK final.indd 106_CP_LCM_Manual_EN-UK final.indd 106 20.6.2007 11:04:2320.6.2007 11:04:23