Accu-Chek GO - Top and Sides; Bottom

11
Introduction
1
Top and sides
a Þ button
Turn on or off, start a set-up to change settings, save entry
b Display
c < and > buttons
Change settings (increase and decrease value, respectively), retrieve
results, request averages
d Test strip guide – this is where you insert the test strip
e Measurement optics cover
f Test strip ejector
g Code chip (supplied with the test strips)
h Infrared port for downloading results to a PC, for instance
Bottom
g Code chip (supplied with the test strips)
i Code chip slot
j Type plate
k Battery compartment
l Battery (type CR 2032)