7.1 Beep tones at power-on
When Acoustic Mode is set to on, your meter announces this when you
O turn it on with a test strip,
O turn it on with the Þ button,
O press the < or > button to review results in memory,
O exit memory or the average screens and go directly to blood glucose
testing by inserting a test strip.
The meter emits a pattern of 6 beeps: one beep – pause – two beeps –
pause – three beeps ( – – – – – – ).
7.2 Beep tones during blood glucose testing
When a blood glucose test is in progress, the meter beeps when
O the meter is ready to test so you can let the test strip draw up blood
or control solution,
O the test strip has drawn up sufficient blood or control solution and
measurement has started,
O the result is displayed,
O the meter displays an error message,
O the meter turned off automatically following a test and the test strip
is still in the test strip guide.
To Next Page
Loading...
Need help?
General
