119
Acoustic Mode
7
7.3 Announcement of the result following a test
In Acoustic Mode, whenever your meter displays a result following a
blood glucose test, it also announces the result as a series of beeps. The
result is not treated as an entity, but is broken down into individual dig-
its.
Examples:
O The result 138 mg/dL is announced as 1 – 3 – 8.
O The result 7.6 mmol/L is announced as 0 – 7 – decimal point – 6.
Each digit is represented by the corresponding number of beeps; e.g. 4
beeps for the number 4 ( – – – – ). Zero is represented by a long beep
( — ).
As soon as the meter displays the result, two short beeps signify that it
is also about to announce the result acoustically ( - - ).
To Next Page
Loading...
