1.2 Main features
Fast testing
The meter needs only approximately 5 seconds for each test.
Simple blood dosing
Blood is drawn up into the strip through capillary action. This makes it
easy to dose and test blood from alternative sites such as the base of
the thumb or forearm.
Blood volume checking
Testing starts automatically when the meter detects that you have
applied sufficient blood (approximately 1.5 µL (1 µL (microlitre) = one
thousandth of a millilitre)). If testing does not start, you may apply more
blood.
Particularly hygienic
Thanks to the type of test strip used, there is no direct contact between
the meter and blood. The test strip ejector also means that there is no
direct contact with blood on the used test strip.
Easy to operate
No need to press buttons when you carry out the test. The test strip
turns the meter on and off. The results are saved automatically.
To Next Page
Loading...
Need help?
General
