25
Entering settings
3
Standard set-up takes you step by step through all the available set-
tings. Standard set-up is therefore best for entering initial settings into
your meter. The order in which you enter settings is shown in the over-
view on page 26. You can only enter settings in the order shown (from
top to bottom).
Quick set-up allows you to select just the setting you wish to change.
Quick set-up is therefore best for quickly changing individual settings. If
you wish to change an alarm time, for instance, you can go directly to
the alarm clock function settings.
In Quick set-up the settings are divided into four groups: F 1, F 2, F 3
and F 4. The Quick set-up map is shown in the overview on page 27.
You can only enter settings within a group in the order shown (from top
to bottom).
To Next Page
Loading...
