mg/dL meters
First the hundreds are announced, then the tens, and finally the units.
There is a short pause between each group of beeps. The hundreds are
always announced, even when the result is below 100. The hundreds in
this case are represented by a long beep, signifying zero.
Examples:
O The result 180 mg/dL is announced as follows:
1 beep – pause – 8 beeps – pause – 1 long beep
( – – – – – – – – – — )
O The result 72 mg/dL is announced as follows:
1 long beep (for 0 hundreds) – pause – 7 beeps – pause – 2 beeps
( — – – – – – – – – – )
mmol/L meters
First the tens are announced, then the units, then the decimal point and
finally the tenths. There is a short pause between each group of beeps.
The tens are always announced, even when the result is below 10. The
tens in this case are represented by a long beep, signifying zero. The
decimal point is represented by a very short beep ( · ).
To Next Page
Loading...
