Examples:
O The result is 138 mg/dL and exp is displayed.
You hear the following beeps:
2 short beeps (introduction) – 2 short, 2 short, 2 short beeps (warn-
ing) – 1, 3, 8 (test result) ( - - - - - - - - – – – – – – – – – – –
– ).
This sequence is sounded twice more.
O The result is 7.6 mmol/L and exp is displayed.
You hear the following beeps:
2 short (introduction) – 2 short, 2 short, 2 short (warning) – 1 long
(for 0 tens) – 7, 1 very short, 6 (test result)
( - - - - - - - - — – – – – – – – · – – – – – – ).
This sequence is sounded twice more.
The acoustic warning is sounded only once, even if two or all three sym-
bols are displayed.
If error messages E_1, E-2, E-3, E-4, EEE or TTT (see Chapter 13.2
“Error messages and troubleshooting”) are displayed, they are
announced by two short beeps sounded four times in succession ( - - -
- - - - - ). This sequence is sounded only once and is not repeated. The
same sequence of beeps is sounded for all error messages. In other
words, they are not differentiated acoustically.
To Next Page
Loading...
Need help?
General
