O Press the Þ button
J to scroll from one setting to the next without changing anything
(this also saves the unchanged setting),
J to save settings you have changed,
J to turn the meter off when End is displayed,
J to leave the set-up at any time and turn the meter off. To do this,
press and hold down the button for at least 3 seconds - all
changes you have made up to then will be saved.
Note
If you are in one of the set-ups and 60 seconds elapses after you
last pressed a button, the meter turns off automatically. All
changes you saved up to then by pressing
Þ
will be retained.
To Next Page
Loading...
Need help?
General
