Using the Meter Buttons
When instructed to press a meter button, press it briefly and release it.
When instructed to press and hold a meter button, press and hold it for 3 or more seconds.
Button Functions
Here are the functions of the power/set button and arrow buttons on the meter. These functions are used
throughout this manual.
Button Function Action
[power/set
button]
Turn the meter on or o.
Navigate to an option or set a selection.
Check the meter display.
Press and release.
With the meter o, press and hold to
see the complete meter display. If one
of the segments is missing or looks
dierent from this picture, do not use
the meter. Contact the Accu-Chek
Customer Care Service Center at
1-800-858-8072.
[right arrow and
left arrow
buttons]
Adjust settings for time and date, scroll
through test results in memory.
Press and release or press and hold to
scroll faster.
memory
set-up
1080_Guide Me_MANUAL_MASTER.indb 10 3/5/2018 1:27:43 PM
To Next Page
Loading...
