Accu-Chek Guide Me

7
Your New System
1
1. Power/Set Button
Turns the meter on or o and sets
options.
2. Display
Shows results, messages, and test
results stored in memory.
3. Left Arrow Button
Press to enter memory, adjust settings,
and scroll through test results.
4. Right Arrow Button
Press to enter memory, adjust settings,
and scroll through averages.
5. Test Strip Slot
Insert test strip here.
6. Battery Door
Open to replace batteries.
7. Micro USB Port
Transfers data from meter to a computer (PC).
The Accu-Chek Guide Me Meter
Chapter 1: Your New System
Front View Back View Side View
1
2
3
5
4
6
7
1080_Guide Me_MANUAL_MASTER.indb 7 3/5/2018 1:27:41 PM