How to Clean and Disinfect the Lancing Device
WARNING
Failure to follow these instructions may damage the lancing device and stop it from working
properly.
• DO NOT get any moisture into any openings.
• Always use the same product for both cleaning and disinfecting.
Wash hands with soap and
water and dry thoroughly.
Wash hands with soap and
water and dry thoroughly.
Wipe the entire surface of the
lancing device and the inside of
the cap with a Super Sani-Cloth.
A separate Super Sani-Cloth
should be used for cleaning and
disinfection. For disinfecting the
lancing device, use a new cloth
and repeat step2 making sure
the surface stays wet for
2minutes.
1
4
2 3
1080_Guide Me_MANUAL_MASTER.indb 46 3/5/2018 1:28:00 PM