Accu-Chek Performa Operator's Manual

26
4. Put the meter on a at surface,
such as a table.
5. Remove the control bottle cap.
Wipe the tip of the bottle with
a lint‑free wipe.
6. Squeeze the bottle until a tiny
drop forms at the tip. Touch
the drop to the front edge of
the yellow window of the test
strip. When
ashes,
sufcient control solution is in
the test strip. Wipe the tip of
the bottle with a lint‑free wipe
then cap the bottle tightly.

Accu-Chek Performa Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Meter Dimensions	94 x 52 x 21 mm
Measurement Range	0.6-33.3 mmol/L
Memory Capacity	500 results
Battery Type	1 x CR2032 lithium coin cell
Automatic Power Off	90 seconds after last user action
Operating Humidity	10 to 90% RH
Storage Conditions	10% to 90% RH
Meter Weight	59 g (with battery)