Accu-Chek Performa Operator's Manual

27
7. The result appears on the
display, along with the control
bottle symbol and ashing “L.”
Do not remove the test strip
yet. Press
once to mark the
result as a Level 1. Press
a
second time to mark the result
as a Level 2.
8. Press and release
to set the
control level in the meter.
9.“OK” and the control result
alternate on the display if the
result is in range. The range is
printed on the test strip
container label. “Err” and the
control result alternate on the
display if the result is out of
range. Remove and discard the
used test strip per facility
policy.
(example)
(example)
(example)

Accu-Chek Performa Specifications

General

Sample Size	0.6 µL
Test Time	5 seconds
Meter Dimensions	94 x 52 x 21 mm
Measurement Range	0.6-33.3 mmol/L
Memory Capacity	500 results
Battery Type	1 x CR2032 lithium coin cell
Automatic Power Off	90 seconds after last user action
Operating Humidity	10 to 90% RH
Storage Conditions	10% to 90% RH
Meter Weight	59 g (with battery)