54
Errors
Code Name Meaning Action
E8 Power You either removed a battery • Press the Check key twice to turn
Interrupt without putting your pump into off and confi rm the error.
STOP fi rst, or you dropped • Your insulin pump goes into
your pump. STOP mode.
• Check the time and date, and
Note: If this error occurs correct if needed.
during programming, check • If a bolus and/or a Temporary Basal
your settings. Rate was interrupted by the error,
review the Bolus History and/or the
Temporary Basal Rate History for
the delivered amount and duration.
• Put your insulin pump into RUN mode.
• If necessary, program a new bolus
and/or Temporary Basal Rate.
E10 Cartridge The CHANGE THE CARTRIDGE • Press the Check key twice to turn
Error function was carried out off and confi rm the error.
incorrectly. • Remove or disconnect the infusion
set from your infusion site.
• Move to the
CHANGE THE CARTRIDGE
menu.
• Prime the infusion set.
• Reconnect the infusion set (tubing)
at your infusion site.
• Put you insulin pump into RUN mode.
To Next Page
Loading...
