3-26 Machine Maintenance Procedures
Keyboard Installation 0
1. Put keyboard (A) face-down on upper cover to show keyboard FPC (C). (Figure 3-27)
2. Connect FPC (C) to mainboard connector (D).
3. Align keyboard flanges (E) with upper cover slots (F). (Figure 3-28)
Figure 3-28. Keyboard Flanges and Upper Cover Slots
4. Install keyboard on upper cover.
5. Secure eight latches (B) of upper cover to keyboard. (Figure 3-24)
6. Install logic door.
To Next Page
Loading...
