Machine Maintenance Procedures 3-47
Mainboard Installation 0
1. Align mainboard ports with lower cover slots (T). (Figure 3-63)
2. Install the mainboard on the lower cover.
3. Install and secure screw (S) to the mainboard. (Figure 3-62)
4. Connect the DC-IN cable (Q) to connector (R) on top of mainboard. (Figure 3-61)
5. Connect the following cables to the mainboard connectors: (Figure 3-60)
USB (B, D)
Bluetooth (E, F)
LVDS (G, H)
Speakers (J, K)
Microphone (L, M)
RJ45 (N, P)
6. Install the tape (C) securing the Bluetooth cable (E) to the lower cover.
7. Install the tape (A) securing the USB FFC (B) to the lower cover.
8. Install the upper cover.
ID Size Quantity Screw Type
S M2.5x3.0 1
To Next Page
Loading...
