Machine Maintenance Procedures 3-33
3. Disconnect touchpad FFC (C) from board connector (D). (Figure 3-39)
Figure 3-39. Touchpad FFC and Touchpad Connector
4. Remove FFC from touchpad board.
Touchpad FFC Installation 0
1. Install touchpad FFC (C) on touchpad board (A). (Figure 3-39)
2. Connect touchpad FFC (C) to board connector (D).
3. Install tape (B) securing touchpad FFC and board connector. (Figure 3-38)
4. Install upper cover.
To Next Page
Loading...
