3-44 Machine Maintenance Procedures
3. Remove screws (D) from modules. (Figure 3-59)
Figure 3-59. Speaker Screws
4. Release cable (E) from lower cover guides (F).
5. Remove speaker modules.
Speaker Module Installation 0
1. Install speaker modules (A) on lower cover. (Figure 3-59)
2. Install and secure cable (E) in lower cover guides (F).
3. Install and secure screws (D) to modules.
4. Connect cable (B) to mainboard connector (C). (Figure 3-58)
5. Install upper cover.
ID Size Quantity Screw Type
D M2.0x3.0
t=0.8 8D
4