3-70 Machine Maintenance Procedures
Microphone Module Removal 0
Prerequisite:
LCD Panel Removal
1. Locate microphone module (A) on LCD cover. (Figure 3-97)
Figure 3-97. Microphone Module
2. Lift foil tab (B) securing microphone module to LCD cover.
3. Lift foil tabs (C) securing microphone cable to LCD cover.
4. Remove microphone module (A) from cover.
Microphone Module Installation 0
1. Install microphone module (A) on LCD cover. (Figure 3-97)
2. Secure foil tabs (C) to microphone cable and LCD cover.
3. Secure foil tab (B) to microphone module and LCD cover.
4. Install LCD panel.
To Next Page
Loading...
