2-18 System Utilities
WinFlash Utility 0
Perform the following to use the WinFlash Utility:
1. Boot to OS.
2. Open Winflash folder. (Figure 2-18)
Figure 2-18. Winflash Program Folder
Flashing of system BIOS cannot be performed on battery power. Make sure AC adapter
is connecting to device before executing program.
3. Double click the WinFlash executable.
4. Click OK to begin the update. (Figure 2-19)
Figure 2-19. Executing Winflash Program (1 of 2)
To Next Page
Loading...
