Machine Maintenance Procedures 3-41
3. Disconnect Bluetooth cable (C) from mainboard connector (D). (Figure 3-53)
Figure 3-53. Bluetooth Cable and Mainboard Connector
4. Remove module (A) from lower cover.
5. Disconnect Bluetooth cable (C) from module connector (E). (Figure 3-54)
Figure 3-54. Bluetooth Module and Cable
Bluetooth Module Installation 0
1. Connect Bluetooth cable (C) to module connector (E). (Figure 3-54)
2. Install module (A) on lower cover. (Figure 3-53)
3. Connect Bluetooth cable (C) to mainboard connector (D).
4. Install tape (B) securing cable and connector to mainboard. (Figure 3-52)
5. Install upper cover.
To Next Page
Loading...
