Machine Maintenance Procedures 3-71
WLAN Antenna Removal 0
Prerequisite:
LCD Panel Removal
1. Locate the auxiliary WLAN antenna (A) on the LCD cover. (Figure 3-98)
Figure 3-98. WLAN Antennas
2. Remove the antenna cable (A) from the LCD cover guides.
3. Remove the foil (B) securing the antenna cable to the LCD cover.
4. Remove the auxiliary WLAN antenna (A) from the LCD cover.
5. Repeat steps one through four for the main WLAN antenna.
WLAN Antenna Installation 0
1. Install the auxiliary WLAN antenna (A) on the LCD cover. (Figure 3-98)
2. Install the foil (B) securing the antenna cable to the LCD cover.
3. Install the antenna cable (A) in the LCD cover guides.
4. Repeat steps one through three for the main WLAN antenna cable.
5. Install LCD panel.
To Next Page
Loading...
