Acer Aspire 7560 - Thermal Module Installation

Machine Maintenance Procedures 3-51
Thermal Module Installation 0
IMPORTANT:
?
Apply suitable thermal grease and make sure all heat pads are in place before
replacing module
.
CAUTION:
!
Thermal grease can damage mainboard. Use caution when applying.
The following thermal pad types are approved for use:
VGA Pads
EAPUS/PSX
Other Pads
Laird/Tflex 340
EAPUS/XR-HL
The following thermal grease types are approved for use:
I-Connoisseur/N302
Honeywell
1. Remove all traces of thermal grease from CPU using a lint-free cloth or cotton swab and
Isopropyl Alcohol, Acetone, or other approved cleaning agent.
2. Apply small amount of thermal grease to center of CPU (E). (Figure 3-68)
NOTE:
NOTE:
Force used during installation of thermal assembly is sufficient to spread grease over
CPU.
Figure 3-68. Thermal Module Installation
3. Align module to mainboard screw holes.
4. Install and secure screws (B1 to B4) in numerical order to mainboard. (Figure 3-67)
5. Install and secure screws (C5 to C6) to mainboard.
6. Install lower cover.
ID Size Quantity Screw Type
B1-B4 M2.5x3.2 w/spring Ni 4
C5-C6 M2.5x3.0 2
E