Machine Maintenance Procedures 3-31
Figure 3-36. Installing Upper Cover (3 of 3)
3. Install and secure screws (E) to upper cover. (Figure 3-31)
4. Connect touchpad FFC (C) to mainboard connector (D). (Figure 3-30)
5. Connect power board FFC (A) to mainboard connector (B).
6. Show lower cover. (Figure 3-29)
7. Install and secure screws (A) to lower cover.
8. Install secondary HDD module.
ID Size Quantity Screw Type
A M2.5x6.0 18
E M2.5x6.0 3
To Next Page
Loading...
