3-62 Machine Maintenance Procedures
3. Continue with the left, right and bottom sides of bezel until all locking latches have been
secured. (Figure 3-84 and Figure 3-85)
Figure 3-84. Securing the LCD Bezel (2 of 3)
Figure 3-85. Securing the LCD Bezel (3 of 3)
4. Install and secure screws (A) to bezel. (Figure 3-78)
5. Install LCD Module.
ID Size Quantity Screw Type
A M2.5x6.0 2
To Next Page
Loading...
