2-22 System Utilities
A key code is generated for use with unlocking utility. Make note of this code.
3. On a separate, compatible device, boot to DOS.
4. Execute UnlockHD.exe (Figure 2-27) to create a password unlock code. Use the format
<UnlockHD [key code]> with the code noted in the Figure 2-26.
Example: UnlockHD 54591747
The command generates a password which can be used for unlocking the HDD.
Password: 41499389
Figure 2-27. Unlock Password
5. On original device, enter password (Figure 2-27) in Enter Unlock Password dialog
(Figure 2-28).
Figure 2-28. Unlock Password Dialog
Enter Unlock Password (Key:54591747)?
To Next Page
Loading...
