7
Setup
This section tells you how to unpack and set up your projector and
connect it to other equipment. The projector must be connected to a
computer or a video source such as a video tape deck, camcorder,
digital camera or laser disk player in order to make a projection. You
may want to connect the projector to both your computer and a video
source, or set up the projector for providing audio source. The audio
source can be the computer, video source, or another device such as a
stereo.
Unpacking the Projector
When you unpack the projector, make sure you have all these
components:
Projector with Lens
Cap
Remote Controller
Battery for Remote
Controller
AC Power Cord
VGA Cable S-Video Cable
AV Composite Cable Carrying Case
Quick Start Card User's Guide
To Next Page
Loading...
