17
Input Menu
This menu allows to specify the signal source that you wish to project.
This is particularly useful if you have several sources (video and/or
computer) connected to your projector. Changing settings procedure
(using either the Projector Control Panel or the Remote Controller):
1 Press the MENU button to
display OSD menu.
2 Press the or button to
select INPUT menu.
3 To enter the sub-menu setting,
press the button or the
MENU button.
4 Press the or button to
select the desired input source.
5 Press the button to confirm the input selection.
6 To exit from the current menu, toggle the MENU button.
The following table provides detail of the available sub-menu choices:
Picture Menu
This menu provides precise control of the projected image including:
Brightness, contrast, horizontal position, vertical position, tracking,
sync and sharpness (just for computer signal).
Option Description
Auto Search Automatically scans the input source.
Computer Signal from computer (desktop or notebook).
YCbCr Component video signal.
S-Video S-Video signal.
Video Composite video signal.
YPbPr/HDTV Signal from YPbPr/HDTV. (High Definition TV - a high-
resolution TV standard, which is part of the group of
digital TV standards introduced in USA in late 1998).
To Next Page
Loading...
