24
Note: Lamp life counter is displayed in read-only format, and this
setting cannot be manually adjusted.
Language Menu
This menu enables you to select the language used in the OSD (on-
screen display) menus. Changing settings procedure (using either the
Projector Control Panel or the Remote Controller):
1 Press the MENU button to
display OSD menu.
2 Press the or button to
select LANGUAGE menu.
3 To enter the sub-menu
setting, press the button
or the MENU button.
4 Press the or button to
select the desired OSD language.
5 Press the button to confirm the OSD language selection.
6 To exit from the current menu, toggle the MENU button.
Note: This projector supports multilanguage.
Reset Menu
This menu allows you to restore all projector settings and adjustments
back to the factory defaults. Changing settings procedure (using either
the Projector Control Panel or the Remote Controller):
Lamp Life Displays lamp's lifetime counter (by hour).
Sub-Menu Option Description
To Next Page
Loading...
