12
Note: The projector is not compatible with a cable TV-style coaxial
"F" connector.
Using the Projector
This section describes projector operations:
• Turning the projector and A/V equipment on and off
• Adjusting the projected image
• Projector controls
• Checking the projector status
Turning the Audio/Visual (A/V) Equipment On
and Off
Always turn on the projector and related A/V equipment in the
following order.
1Projector
2Computer
3 Video source
4 Audio source
Turning the Projector On and Off
1 Connect the power cord to the projector.
2 Insert the power plug into a wall outlet.
3 Remove the projector lens cap.
4 Press the Power button (on either the Remote Controller or the
Projector Control Panel) to turn on the projector. When the lamp
LED indicator lights in green, the projecting image gets full
illumination.
Warning: Never look into the lens when the lamp is on. This
can damage your eyes. It is especially important that
children are not allowed to look into the lens.
To Next Page
Loading...
