22
The following table provides detail of the available sub-menu choices:
Option Menu
This menu includes projector utilities for OSD timeout, OSD horizontal
position, OSD vertical position, rear mode, ceiling mode, aspect ratio,
auto off and lamp life indication. Changing settings procedure (using
either the Projector Control Panel or the Remote Controller):
1 Press the MENU button to
display OSD menu.
2 Press the or button to
select OPTION menu.
3 To enter the sub-menu
setting, press the button
or the MENU button.
4 Press the or button to
select the sub-menu item.
5 Press the or button to adjust the value of desired sub-menu
item.
• On the Rear, Ceiling, Aspect Ratio and Auto Off sub-menus,
press the or button to select the desired setting.
• On the Lamp Life sub-menu, the lamp's lifetime counter is
calculated by the projector system.
Sub-Menu Option Description
V-Keystone Adjusts trapezoidal distortion (vertically) of the
picture that may occur depending the projection
angle.
Freeze Freezes the screen.
Yes Freeze function is active.
No Freeze function is inactive.
Blank Blanks the screen temporarily.
Yes Blank function is active.
No Blank function is inactive.
To Next Page
Loading...
