14
Operational Indicator (LED)
There are two LEDs on the top of the projector, the Power LED and the
Lamp LED. They provide valuable information about the projector.
LED TYPE COLOR STATUS MEANING
Power LED Green Solid The projector is powered and ready.
Power LED Red Solid The projector system has some
problems with its fan, so the projector
cannot start up.
Lamp LED Green Solid The lamp is in good condition and is
projecting at maximum brightness.
Lamp LED Red Solid The lamp has reached its end of life
and must be changed soon. The lamp
will continue to operate until it fails.
Change the lamp and reset the lamp
time counter. If the lamp is off, then
the ballast will become malfunction.
Lamp LED Amber Flashing The projector is shutting down. The
fan motor is cooling the lamp for
shutdown. Do not unplug the power
cable or turn the power switch off
before the Lamp LED turns off. The fan
motor will turn off when the lamp has
cooled.
Lamp LED Red Flashing Temperature is too high. The lamp will
turn off.
To Next Page
Loading...
