23
6 After you have done with the adjustment of a sub-menu item:
a To resume changing another sub-menu item: press the or
button.
b To exit from the current menu: toggle the MENU button.
The following table provides detail of the available sub-menu choices:
Sub-Menu Option Description
OSD Timeout Duration OSD menu stays active (at idle
state).
OSD PosiH Adjusts OSD menu display position
(horizontally - left & right) on the screen.
OSD PosiV Adjusts OSD menu display position
(vertically - up & down) on the screen.
Rear The image is reversed horizontally.
Yes Rear projection is active.
No Rear projection is inactive.
Ceiling The image is inverted vertically.
Yes Ceiling projection is active.
No Ceiling projection is inactive.
Aspect Ratio HDTV and video display selection.
1:1 Selects 1:1 aspect ratio.
16:9 Selects 16:9 aspect ratio.
4:3 Selects 4:3 aspect ratio.
Auto Off Automatically turns off the lamp if the
projector does not detect an input signal
for specified time period (30 minutes).
Yes Auto Off is active.
No Auto Off is inactive.
To Next Page
Loading...
