Acer PL111 - Page 23

18
Changing settings procedure (using either the Projector Control Panel
or the Remote Controller):
1 Press the MENU button to
display OSD menu.
2 Press the or button to
select PICTURE menu.
3 To enter the sub-menu
setting, press the button
or the MENU button.
4 Press the or button to
select the sub-menu item.
5 Press the or button to adjust the value of desired sub-menu
item.
6 After you have done with the adjustment of a sub-menu item:
a To resume changing another sub-menu item: press the or
button.
b To exit from the current menu: toggle the MENU button.
The following table provides detail of the available sub-menu choices:
Sub-Menu Description
Brightness The higher the setting, the brighter the image. The lower
the setting, the darker the image.
Contrast The higher the setting, the greater the contrast. The lower
the setting, the lower the contrast.
PosiH Adjusts the horizontal position.
PosiV Adjusts the vertical position.
Tracking Adjusts the horizontal pixel of the image.
Sync Adjusts the dot phase of the input signal. Adjusts the
picture to where it looks best.
Sharpness The higher the setting, the sharper the image. The lower
the setting, the softer the image.