Acer Power - Setting up Landesk Client Manager

AcerPower Minitower (M11E/IDCATX-2) User's Guide
cxxiv
4.8.1 Setting Up LANDesk Client Manager
Installing LANDesk Client Manager, Client Version
To install LANDesk Client Manager, Client Version, do the following:
• Invoke the Acer Software Installer from Acer Resource CD (refer to previous section
for instructions).
• Click Intel LANDesk Client Manager.
• Follow the instructions to complete the installation.
To reinstall LDCM, or to install a newer
version of LDCM, you must remove the
existing copy of LDCM first.
Removing LANDesk Client Manager
To remove the LANDesk Client Manager, on your Windows desktop:
• Click Start | Settings | Control Panel.
• Double-click Add/Remove Programs.
• Double-click LANDesk Client Manager.
• Follow the instructions to completely remove LDCM.