Acer Power - Pnp;Pci Options; Pci Irq Setting

Index
lxxv
2.10.2 PnP/PCI Options
The PnP/PCI Options allows you to specify the settings for your PCI devices. Selecting
this option displays the following screen:
PnP/PCI Options
PCI IRQ Setting ...........[ Auto ]
INTA INTB INTC INTD
PCI Slot 1 ..............[--] [--] [--] [--]
PCI Slot 2 ..............[--] [--] [--] [--]
PCI Slot 3 ..............[--] [--] [--] [--]
PCI Slot 4 ..............[--] [--] [--] [--]
PCI Slot 5 ..............[--] [--] [--] [--]
AGP .....................[--]
PCI IRQ Sharing ............. [Yes]
VGA Palette Snoop .......... [Disabled]
Graphics Aperture Size ...... [64] MB
Plug and Play OS ............ [Yes]
Reset Resource Assignments .. [No ]
PCI IRQ Setting
Select Auto to let BIOS automatically configure the plug-and-play (PnP) devices installed
on your system. Otherwise, select Manual. The default setting is Auto.
Refer to your PCI user's manual for any special
requirements.
The onboard USB device will report or share the IRQ resource with PCI Slot 4.