Acer Power - Removing a Pentium II Processor

AcerPower Minitower (M11E/IDCATX-2) User's Guide
xxvi
1.6 Removing a Pentium II Processor
Observe the ESD precautions (section 1.5.1)
when installing or removing a system component.
Follow these steps to remove the Pentium II CPU module from the slot.
1. Remove the fan connections. See Table 1-2.
2. Unlock the latches that secure the processor module.
Figure 1-4 Unlocking the Module Latches
2. Firmly hold the processor module and pull it out of the socket.