Acer Power - Exit Setup

AcerPower Minitower (M11E/IDCATX-2) User's Guide
lxxx
2.12 Exit Setup
Examine the system configuration values. When you are satisfied that all the values are
correct, write them down. Store the recorded values in a safe place. In the future, if the
battery loses power or the CMOS chip is damaged, you will know what values to enter
when you rerun Setup.
Press to leave Setup Utility. The following dialog box appears:
Exit Setup
Do you really want to exit Setup?
[Yes] [No]
Use the arrow keys to select your response. Press .
If you made any changes to the Setup Utility, the dialog box below is displayed.
Exit Setup
Settings have been changed.
Do you want to save CMOS settings?
[Yes] [No]
Use the arrow keys to select your response. Select Yes to save the changes in CMOS.
Select No to retain the old configuration values. Press to exit.