35
Number of Years and Hours that the TMain solenoid
has been on since the last TMain timer reset
Number of Months and Minutes that the TMain
solenoid has been on since the last TMain timer reset
Number of Days that the TMain solenoid has been
on since the last TMain timer reset
Timer
Reset TMain 1 / 2 solenoid timer
Solenoid Drivers Menu Options
The CSC400 incorporates low power solenoid driver technology to save power on each solenoid output while maintaining the
ON state. Refer to the Low Power Solenoid Drivers section on page 19 for more information.
Solenoid Drivers
Menu Selections
Possible Options/Values (Cycle
time)
Duty Cycle time for Pilot 1 solenoid output
Duty Cycle time for Main 1 solenoid output
Duty Cycle time for TMain 1 solenoid output
Duty Cycle time for Pilot 2 solenoid output
Duty Cycle time for Main 2 solenoid output
Duty Cycle time for TMain 2 solenoid output
Time and Date Set Menu Options
The CSC400 allows the user to modify the current time and date. A time and date stamp is added to the shutdown log for each
shutdown event.
Hour for the current time
Minutes for the current time
Select between 12 or 24 hour time display
Modbus Settings Menu Options
The Modbus RTU settings for the CSC400 are changed in this menu. Refer to the "
Modbus/RS-485 Cable Connections – Field Installations - Field Installations" section on page 39. Also refer to the CSC400
Modbus Manual for additional details.
Modbus Slave ID of the CSC400
Serial Baud rate for Modbus RTU
300, 1200, 2400, 9600, 19200,
38400
Serial Format for the CSC400 (eg. 8N1)
To Next Page
Loading...
Need help?
General