20
CHD Setup
Press ◄ or ► to set CHD to either On or OFF. When CHD is set to On, the
meter can enter the Coronary Heart Disease risk evaluation. Press to
save and proceed to Specimen Type Setup.
For professional use: Use this function to evaluate the 10-year CHD risk of
your patients.
This function is not designed for self-testing use. It can only be used by
professionals.
Specimen Type Set Up
Press ◄ or ► to set specimen type to either bL or SE. When specimen
type is set to bL, control solution, fresh capillary blood, EDTA or heparinized
venous whole blood can be used. When specimen type is set to SE, serum
and heparinized plasma can be used. Press to save and return to the
setup screen.
OR
OR
To Next Page
Loading...
Need help?
General
